SABIC HDPE M80064SE SABIC Polyethylene, High Density

Product Description

SABIC® HDPE M80064SE is an UV stabilized, high density polyethylene injection moulding grade with a narrow molecular weight distribution. It is intended for use in injection moulding applications where rigidity, toughness and warp resistance are required.

General

Material Status

Commercial: Active

Availability

Europe

Additive

UV Stabilizer

Features

Good Toughness

Medium Rigidity

Narrow Molecular Weight Distribution

Warp Resistant

Uses

Crates

Industrial Applications

Pails

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR)			ISO 1133
190°C/2.16 kg		g/10 min
190°C/5.0 kg		g/10 min
Melt Volume-Flow Rate (MVR)			ISO 1133
190°C/2.16 kg		in³/10min
190°C/5.0 kg		in³/10min
Environmental Stress-Cracking Resistance² (140°F, 0.118 in, Rhodacal-DS10, Compression Molded)		hr	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (0.0787 in, Compression Molded)		psi	ISO 527-2/1BA/50
Tensile Stress			ISO 527-2/1BA/50
Yield, 0.0787 in, Compression Molded		psi
Break, 0.0787 in, Compression Molded		psi
Tensile Strain (Break, 0.0787 in, Compression Molded)		%	ISO 527-2/1BA/50
Tensile Creep Modulus			ISO 899-1
1 hr		psi
1000 hr		psi
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D, Compression Molded)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (66 psi, Unannealed)		°F	ISO 75-2/B
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature (DSC)		°F	DIN 53765
Enthalpy Change		J/g	DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE M80064SE, SABIC HDPE M80064SE, SABIC® HDPE , SABIC HDPE, SABICHDPEM80064SE, SABICHDPE, HDPEM 80064 SE, HDPEM80064SE, HDPEM80064, HDPE, M 80064 SE, M80064SE, M80064, 80064SE, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 80064M, 80064HDPEM
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Medium Rigidity, Good Rigidity, Good Toughness, Tough, Warp Resistant, Warpage Resistant.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi

Notes

¹Typical properties: these are not to be construed as specifications.

²2 MPa

SABIC® HDPE M80064SE

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)