IDES Prospector Already have an account? Login Here

IDES

MAXTEL® 600-BK

Compounded Polypropylene

Supplied by MRC Polymers, Inc.

The technical datasheet with complete property values for MAXTEL® 600-BK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
For automotive exterior applications. Excellent process ability and dimensional stability. Further information and details are available upon request.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • Good Processability
  • High Impact Resistance
Uses 
  • Automotive Exterior Parts
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed, 0.126 in Span)
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MAXTEL® 600-BK, MAXTEL 600BK, MAXTEL® , MAXTEL, MAXTEL600BK, 600, 600-BK, 600BK, 600:BK, 600/BK, 600+BK, 600_BK, 600 BK, Polypropylene, Compounded, Polypropylene Compounded, TPO, Polypropylene, PP, MRC Polymers, PolypropyleneCompounded, BK600
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Dimensional Stability, Dimensionally Stable, High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Cushion
in
  
Injection Notes
Screw RPM: Slow to Moderate
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.