IDES Prospector Already have an account? Login Here

IDES

MCGB HDPER 2009XP279/20% Corn Cob

High Density Polyethylene

Corn Cob Flour, 20%

Supplied by MCG BioComposites, LLC

The technical datasheet with complete property values for MCGB HDPER 2009XP279/20% Corn Cob is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Corn Cob Flour, 20% Filler by Weight
Recycled Content 
  • Yes
Features 
  • Renewable Resource Content
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MCGB HDPER 2009XP279/20% Corn Cob, MCGB HDPER 2009XP27920 Corn Cob, MCGB , MCGBHDPER2009XP27920CornCob, HDPER 2009 XP 279, HDPER 2009XP279, HDPER 2009 XP 279 20 Corn Cob, HDPER2009XP279, HDPER 2009XP279/20% Corn Cob, HDPER 2009XP27920 Corn Cob, HDPER 2009XP279:20% Corn Cob, HDPER 2009XP279+20% Corn Cob, HDPER 2009XP279-20% Corn Cob, HDPER 2009XP279_20% Corn Cob, HDPER 2009XP279 20% Corn Cob, HDPER2009, 2009XP, XP279, 27920, 20Corn, CornCob, HDPER2009XP27920CornCob, HDPER 2009XP279_20 Corn Cob, HDPER 2009XP279 20 Corn Cob, HDPER2009XP279_20CornCob, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, MCG BioComposites, PolyethyleneHighDensity, 2009HDPER
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.