IDES Prospector Already have an account? Login Here

IDES

HAPWELD 36

Thermoplastic

Supplied by Hapco Inc.

The technical datasheet with complete property values for HAPWELD 36 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
  • A two part, non-shrinking, 100% solids, amber clear, polymer adhesive which cures at room temperature. It is a flowable polymer adhesive which forms permanent structural bonds between similar and dissimilar materials.
  • Once hardened, HAPWELD 36 resists moisture, water, solvents, chemicals, and retains good bond strength up to 160°F.
  • May be used from 2:1 to 1:1 by volume or by weight, making it ideal for both field and production applications.
  • The "workhorse" of our polymer adhesive line and will bond most metals, plastics, ceramics, wood, fabrics, canvas, etc. As you increase the mix from 2:1 to 1:1, the cured product becomes semi-rigid and has lower heat resistance
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Bondability
  • Good Chemical Resistance
  • Low Shrinkage
  • Moisture Resistant
  • Solvent Resistant
Uses 
  • Adhesives
Appearance 
  • Clear Amber
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Weight - Per gallon
g
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
  
Shear Strength
psi
 ASTM D732
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
  
Thermal
Nominal Value
Unit
Test Method
Service Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (77°F)
ohm·cm
  
Dielectric Constant (77°F)
 
  
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Part A 2
 
  
Part A 3
 
  
Part B 2
 
  
Part B 3
 
  
Thermoset Mix Viscosity
cP
  
Work Time 4
hr
  
Additional Information
Nominal Value
Unit
Test Method
Cure Time (70°F)
day
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAPWELD 36, HAPWELD , HAPWELD36, 36, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, Hapco Inc., ThermoplasticUnspecified, TPUnspecified
Features
Features may also be described by the following terms: Low Shrinkage, Bondability, Bondable, Good Chemical Resistance, Chemical Resistant, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption.
Notes
1Typical properties: these are not to be construed as specifications.
2Semi-rigid
3Hard
4Depending on mix ratio. Longest working life is at 2 parts A to 1 part B, and the shortest is at 1:1 mixing ratio.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.