IDES Prospector Already have an account? Login Here

IDES

HAPWELD 39

Thermoplastic

Supplied by Hapco Inc.

The technical datasheet with complete property values for HAPWELD 39 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
  • Similar in most characteristics to HAPWELD 37; mix ratio, consistency, color, etc., but also has the ability to cure fast (15 minutes @ 77° F) and will cure in temperatures as low as 0° F.
  • May be used when either a faster set (less than 1/2 hour) or cold cure are required.
This unique polymer adhesive lends itself to outdoor applications year round; patching tanks, repairing valves and shafts, repairing cement or brick, caulking, sealing, and all types of adhesive applications.
  • The decreased cure time also makes HAPWELD 39 ideally suited for faster, in line, production cycles.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Cure
  • High Strength
  • Low Viscosity
  • Thixotropic
  
Uses 
  • Outdoor Applications
  • Repairing Material
  • Textile Applications
Appearance 
  • Grey
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Weight - Per gallon
g
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
  
Shear Strength
psi
 ASTM D732
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
  
Thermal
Nominal Value
Unit
Test Method
Service Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity (77°F)
ohm·cm
  
Dielectric Constant (77°F)
 
  
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Part A
 
  
Part B
 
  
Work Time 2
min
  
Additional Information
Nominal Value
Unit
Test Method
Cure Time (70°F)
min
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAPWELD 39, HAPWELD , HAPWELD39, 39, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, Hapco Inc., ThermoplasticUnspecified, TPUnspecified
Features
Features may also be described by the following terms: Fast Cure, Fast Curing, Low Viscosity, High Strength.
Notes
1Typical properties: these are not to be construed as specifications.
2Depending on mix ratio. Longest working life is at 2 parts A to 1 part B, and the shortest is at 1:1 mixing ratio.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.