IDES Prospector Already have an account? Login Here

IDES

S-RIM 5880 Tan

Thermoplastic

Supplied by Hapco Inc.

The technical datasheet with complete property values for S-RIM 5880 Tan is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Fast Molding Cycle
  • High Heat Resistance
  
Appearance 
  • Tan
Forms 
  • Liquid
Processing Method 
  • Structural React. Inject. Molding (SRIM)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D4669
Molding Shrinkage - Flow
in/in
 ASTM D2566
Weight - per cubic inch
g
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed 2
°F
  
66 psi, Unannealed
°F
  
264 psi, Unannealed 2
°F
  
264 psi, Unannealed
°F
  
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Part A
 
  
Part B
 
  
Thermoset Mix Viscosity 3 (77°F)
cP
 ASTM D4878
Demold Time
     Internal Method
70°F
min
  
150°F
min
  
Gel Time 4 (77°F)
sec
 ASTM D2971
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: S-RIM 5880 Tan, SRIM 5880 Tan, S-RIM , SRIM, S:RIM, S/RIM, S+RIM, S_RIM, S RIM, SRIM5880Tan, 5880 Tan, 5880Tan, Thermoplastic, Unspecified, Thermoplastic Unspecified, TP, Unspecified, TP Unspecified, Hapco Inc., ThermoplasticUnspecified, TPUnspecified, Tan5880
Features
Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, High Heat Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
2Cured at 130°C
3Range: 550 to 650
4100 g
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.