IDES Prospector Already have an account? Login Here

IDES

Sanfor® G/25

Styrene Acrylonitrile

Glass Fiber Reinforcement, 25%

Supplied by SO.F.TER. SPA

The technical datasheet with complete property values for Sanfor® G/25 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 25% Filler by Weight
Features 
  • Good Dimensional Stability
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage - Flow
in/in
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
ASTM D638
Tensile Elongation (Break)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525 2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0315 in
 
 
0.0630 in
 
 
0.126 in
 
 
Needle Flame Test
 
IEC 60695-2-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sanfor® G/25, Sanfor G25, Sanfor® , Sanfor, SanforG25, G/25, G25, G:25, G+25, G-25, G_25, G 25, Styrene Acrylonitrile, SAN, Softer SPA, StyreneAcrylonitrile, 25G
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.