IDES Prospector Already have an account? Login Here

IDES

VICOTE® 704

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICOTE® 704 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film thicknesses range from < 100 microns up to 500 microns. Film thicknesses above 1 mm are possible by building up the coating thickness by the hot flocking technique.

Like other non-coating grades of VICTREXPEEK polymer, VICOTE Coatings are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines, the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.
  • High continuous use temperature of 260°C (500°F)
  • Excellent wear, abrasion and cut through resistance at these high temperatures
  • Excellent chemical and radiation resistance
  • Low level of extractables
  • Hydrolysis resistant
  • Inherently flame retardant
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Wear Resistance
  • High Heat Resistance
  • Hydrolysis Resistant
  • Low Extractables
  • Radiation (Gamma) Resistant
Uses 
  • Coating Applications
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Powder
Processing Method 
  • Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DSC
Melting Temperature
°F
 DSC
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Additional Information
Nominal Value
Unit
Test Method
Konig Hardness
min
 ISO 1522
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICOTE® 704, VICOTE 704, VICOTE® , VICOTE, VICOTE704, 704, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Victrex
Features
Features may also be described by the following terms: High Heat Resistance, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable, Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, Good Abrasion Resistance, Abrasion Resistant, Low Extractables.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.