IDES Prospector Already have an account? Login Here

IDES

VICOTE® F805 Natural

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICOTE® F805 Natural is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The VICOTE F805 natural, F806 natural and F807Blk grades have been specifically formulated to provide a tough, resilient, high wear resistant coating with varying levels of lubricants on ferrous and non-ferrous substrates such as carbon steel, cast steel and aluminium. Typical properties are high continuous use temperature of 260°C, exceptional wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical resistance. VICOTE dispersions have a low level of extractables. These properties are retained at high temperatures where other release coatings may potentially fail. Contact Victrex for further details.

VICOTE F805 natural, F806 natural and F807Blk dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The PEEK polymer contained in the VICOTE dispersions like other non coating grades of VICTREX® PEEK™ polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK is renowned for.

VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance brochure for further details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Toughness
  • Good Wear Resistance
  • High Heat Resistance
  • Low Extractables
  • Resilient
Uses 
  • Coating Applications
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Liquid
Processing Method 
  • Coating
  • Spraying
  
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction 2
 
 ASTM G133
Additional Information
Nominal Value
Unit
Test Method
Cross Hatch Adhesion 3
     ISO 2409
Aluminum
 
  
Mild Steel
 
  
Stainless Steel
 
  
Direct Impact 4
     ISO 6272
Height
in
  
Indentation depth
in
  
Weight
g
  
Konig Hardness (1.6 to 2.0 mil)
min
 ISO 1522
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICOTE® F805 Natural, VICOTE F805 Natural, VICOTE® , VICOTE, VICOTEF805Natural, F 805 Natural, F805 Natural, F805, 805Natural, F805Natural, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Victrex, 805F
Features
Features may also be described by the following terms: Low Extractables, Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, Good Toughness, Tough, High Heat Resistance, Good Abrasion Resistance, Abrasion Resistant.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Using 250N Load, µm @ 10 min
3Rating 0 to 5
4Part 1
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.