IDES Prospector Already have an account? Login Here

IDES

VICOTE® F810 Grey

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICOTE® F810 Grey is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
The VICOTE F810 Grey grade has been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other release coatings would potentially fail. VICOTE dispersions have a low level of extractables. Contact Victrex plc for further details.

VICOTE F810 Grey dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The VICTREX® PEEK™ polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer is thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

VICOTE Coatings have excellent chemical resistance. Consult the Victrex Chemical Resistance Data Base for further details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Mold Release
  • Good Wear Resistance
  • High Heat Resistance
  • Low Extractables
Uses 
  • Coating Applications
Agency Ratings 
Appearance 
  • Grey
Forms 
  • Liquid
Processing Method 
  • Coating
  • Spraying
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 2811
pH
 
 Internal Method
Viscosity (77°F)
sec
 ISO 2431
Weight - Solids
%
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 3
°F
 DSC
Additional Information
Nominal Value
Unit
Test Method
Cross Hatch Adhesion 4
     ISO 2409
Aluminum
 
  
Mild Steel
 
  
Stainless Steel
 
  
Direct Impact 5
     ISO 6272
Height
in
  
Indentation depth
in
  
Weight
g
  
Theory Volume Solids
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICOTE® F810 Grey, VICOTE F810 Grey, VICOTE® , VICOTE, VICOTEF810Grey, F 810 Grey, F810 Grey, F810, 810Grey, F810Grey, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Victrex, 810F
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, Good Abrasion Resistance, Abrasion Resistant, Low Extractables, Good Mold Release, Easy Release, Good Demolding, High Heat Resistance.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
225°C
3Peak
4Rating 0 to 5
5Part 1
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.