IDES Prospector Already have an account? Login Here

IDES

Bayblend® FR632 GR

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® FR632 GR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bayblend® FR632 GR is a flame-retardant PC/ABS containing a minimum of 60% recycle resin with at least 30% Post Consumer Recyclate. The flame retardant additive in this grade is antimony/ bromine/chlorine-free. Bayblend FR632 GR is noted for its combination of high impact strength and good balance of flow and mechanical performance. The key property of FR632 GR is thin wall flame resistance: V-0/1.2 mm, which makes Bayblend FR632 GR an ideal candidate for a wide variety of thin wall applications where a high flame rating is required. This resin is naturally opaque. Due to the post consumer recycle content, color options are limited. Bayblend FR632 GR is supplied in pellet form for a wide variety of injection molding applications.
General  
Material Status 
  • Experimental: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Recycled Content 
  • Yes, 60%
Features 
  • Antimony Free
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Good Flow
  • High Impact Resistance
Uses 
  • Thin-walled Parts
RoHS Compliance 
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (240°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (240°C/5.0 kg)
in³/10min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Instrumented Dart Impact 2, 3 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     Internal Method
0.0472 in
 
  
0.118 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® FR632 GR, Bayblend FR632 GR, Bayblend® , Bayblend, BayblendFR632GR, FR 632 GR, FR632 GR, FR632, 632GR, FR632GR, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 632FR
Features
Features may also be described by the following terms: No Chlorine Content, Chlorine Free, Bromine Free, No Bromine Content, High Impact Resistance, No Antimony, Antimony free, Good Flow.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Cushion
in
  
Injection Notes
Hold: 50-75% of injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
222.0 ft/sec
30.5 in dart, 3 in clamp
4Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.