IDES Prospector Already have an account? Login Here

IDES

Bayblend® FR610 GR

Acrylonitrile Butadiene Styrene + PC

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayblend® FR610 GR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bayblend® FR610 GR and FR630 GR are flame retardant PC/ABS containing recycle resin. Bayblend® FR610 GR contains a minimum of 40% recycle resin with at least 10% Post Consumer Recyclate and Bayblend® FR630 GR contains a minimum of 60% recycle resin with at least 30% Post Consumer Recyclate. The flame retardant additive in these grades in antimony/bromine/chlorine- free. Bayblend® FR610 GR and FR630 GR resins are noted for their combination of high impact strength and good balance of flow and mechanical performance. These resins are naturally opaque. Due to the post consumer recycle content, color options are limited. Bayblend® FR610 GR and FR630 GR are supplied in pellet form for a wide variety of injection molding applications.
General  
Material Status 
  • Experimental: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Recycled Content 
  • Yes, 40%
Features 
  • Antimony Free
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Good Flow
  • High Impact Resistance
RoHS Compliance 
Appearance 
  • Opaque
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (240°C/5.0 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (240°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength (5.0% Strain)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D4812
Instrumented Dart Impact 2, 3 (73°F, 0.125 in, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.125 in
°F
  
264 psi, Unannealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     Internal Method
0.0591 in
 
  
0.118 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® FR610 GR, Bayblend FR610 GR, Bayblend® , Bayblend, BayblendFR610GR, FR 610 GR, FR610 GR, FR610, 610GR, FR610GR, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 610FR
Features
Features may also be described by the following terms: No Chlorine Content, Chlorine Free, Bromine Free, No Bromine Content, High Impact Resistance, No Antimony, Antimony free, Good Flow.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Cushion
in
  
Injection Notes
Hold: 50-75% of injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
222.0 ft/sec
30.5 in dart, 3 in clamp
4Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.