IDES Prospector Already have an account? Login Here

IDES

BorPure™ MB6561

High Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for BorPure™ MB6561 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BorPure MB6561 is a bimodal, high-density polyethylene intended for injection and compression moulding. This grade combines excellent organoleptic properties, environmental stress crack resistance and superior flow properties with good impact strength even at low temperatures.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • Good Impact Resistance
  • Good Organoleptic Properties
  • High ESCR (Stress Crack Resist.)
  • Low Temperature Impact Resistance
  • Recyclable Material
Uses 
  • Caps
  • Closures
  • Consumer Applications
  • Industrial Applications
  • Packaging
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance (10% Igepal, F50)
hr
 ASTM D1693B
FNCT 2 (122°F)
hr
 ISO 16700
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield)
%
 ISO 527-2/50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BorPure™ MB6561, BorPure MB6561, BorPure™ , BorPure, BorPureMB6561, MB 6561, MB6561, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Borealis, PolyethyleneHighDensity, 6561MB
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Flow, Good Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Organoleptic Properties.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
26 MPa, Arcopal N110 2%
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.