IDES Prospector Already have an account? Login Here

IDES

Arnite® K22-KMV5 /J

Polyamide 6

Mineral Filler, 25%

Supplied by DSM Engineering Plastics

The technical datasheet with complete property values for Arnite® K22-KMV5 /J is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Mineral Filler, 25% Filler by Weight
Additive 
  • Flame Retardant
  • Heat Stabilizer
  
Features 
  • Flame Retardant
  • Halogen Free
  • Heat Stabilized
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1 e A
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1 eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flammability Classification (0.0630 in)
 
 IEC 60695-11-10, -20
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arnite® K22-KMV5 /J, Arnite K22KMV5 J, Arnite® , Arnite, ArniteK22KMV5J, K 22, K 22 KMV 5 J, K22-KMV5 /J, K22KMV5 J, K22-KMV5 :J, K22-KMV5 +J, K22-KMV5 -J, K22-KMV5 _J, K22-KMV5 J, K22:KMV5 /J, K22/KMV5 /J, K22+KMV5 /J, K22_KMV5 /J, K22 KMV5 /J, K22, 22KMV, KMV5, 5J, K22KMV5J, K22KMV5 _J, K22_KMV5 J, K22 KMV5 J, K22KMV5_J, K22_KMV5J, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, DSM EP, Polyamide6, Nylon6, 22K
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Zero Halogen Content, Halogen Free.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.