GELOY XTPMFR15 Resin SABIC IP Euro Acrylonitrile Styrene Acrylate + PC

Product Description

Geloy XTPMFR15 is a chlorine and bromine free flame retardant ASA/PC blend with improved impact performance/ductility and an UL94 rating of V0 at 1.5mm. This grade has a f1 rating according UL746C.

General

Material Status

Commercial: Active

Availability

Europe

Features

Bromine Free

Chlorine Free

Ductile

Flame Retardant

Good Impact Resistance

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR)			ISO 1133
220°C/10.0 kg		in³/10min
260°C/2.16 kg		in³/10min
Molding Shrinkage - Flow²		in/in	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--³		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield⁴		psi	ASTM D638
Yield⁵		psi	ASTM D638
Yield		psi	ISO 527-2/50
Break⁴		psi	ASTM D638
Break⁵		psi	ASTM D638
Break		psi	ISO 527-2/50
Tensile Elongation
Yield⁴		%	ASTM D638
Yield⁵		%	ASTM D638
Yield		%	ISO 527-2/50
Break⁴		%	ASTM D638
Break⁵		%	ASTM D638
Break		%	ISO 527-2/50
Flexural Modulus⁶		psi	ISO 178
Flexural Strength^6, 7		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁸ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁹		ft·lb/in²	ISO 180/1A
32°F⁹		ft·lb/in²	ISO 180/1A
73°F⁹		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature¹⁰
66 psi, Unannealed, 2.52 in Span		°F	ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
CLTE			ISO 11359-2
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0472 in
0.0591 in
0.0787 in
0.118 in
Glow Wire Flammability Index (0.0315 in)		°F	IEC 60695-2-12
Glow Wire Ignition Temperature			IEC 60695-2-13
0.0315 in		°F
0.0394 in		°F
0.0787 in		°F
0.118 in		°F
Oxygen Index		%	ISO 4589-2
UL	Nominal Value	Unit	Test Method
Hot-wire Ignition (HWI) (PLC)			UL 746
High Amp Arc Ignition (HAI) (PLC)			UL 746
Outdoor Suitability			UL 746C
Fill Analysis	Nominal Value	Unit	Test Method
Melt Viscosity (500°F, 1500 sec^-1)		Pa·s	ISO 11443
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* XTPMFR15 Resin, GELOY XTPMFR15 Resin, GELOY* , GELOY, GELOYXTPMFR15Resin, XTPMFR 15 Resin, XTPMFR15 Resin, XTPMFR15, 15Resin, XTPMFR15Resin, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 15XTPMFR
Features
Features may also be described by the following terms: Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free, Good Impact Resistance.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tensile Bar

³2.0 in/min

⁴Type I, 0.20 in/min

⁵Type I, 2.0 in/min

⁶0.079 in/min

⁷Yield

⁸80*10*4 sp=62mm

⁹80*10*4

¹⁰80*10*4 mm

GELOY* XTPMFR15 Resin

Acrylonitrile Styrene Acrylate + PC

Supplied by SABIC Innovative Plastics Europe