IDES Prospector Already have an account? Login Here

IDES

Bayblend® ET3032 FR

Acrylonitrile Butadiene Styrene + PC

Mineral Filler, 10%

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Bayblend® ET3032 FR is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Rubber modified PC blend; 10 % mineral filled; flame-retardant; extrusion grade; Vicat/B 120 temperature = 108 °C; good extrusion and vacuum-forming behaviour; UL 94 V-0 (0.75 mm) (Bayer internal test); halogen-free according to DIN VDE 0472,815; glow wire temperature (GWFI): 960 °C at 2.0 mm.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Filler / Reinforcement 
  • Mineral Filler, 10% Filler by Weight
Additive 
  • Flame Retardant
  • Rubber Impact Modifier
  
Features 
  • Flame Retardant
  • Impact Modified
  • Low Halogen Content
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Melt volume-flow rate (260°C/5.0 kg)
in³/10min
 ISO 1133 2
Molding Shrinkage 3
     ISO 2577
Across Flow: 500°F
%
  
Flow: 500°F
%
  
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress
      
Yield
psi
 ISO 527-2 2
Break
psi
 ISO 527-2/50
Tensile Strain
      
Yield
%
 ISO 527-2 2
Break
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ISO 306/B120
50°C/h, B (50N)
°F
 ISO 306 2
CLTE
     ISO 11359-2 2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
      
0.0295 in
 
 Internal Method
0.0787 in
 
 UL 94
0.118 in
 
 UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (500°F, 1000 sec^-1)
Pa·s
 ISO 11443-A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayblend® ET3032 FR, Bayblend ET3032 FR, Bayblend® , Bayblend, BayblendET3032FR, ET 3032 FR, ET3032 FR, ET3032, 3032FR, ET3032FR, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, Bayer Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 3032ET
Features
Features may also be described by the following terms: Low Halogen Content.
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3MT: 80°C, 150x105x3 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.