IDES Prospector Already have an account? Login Here

IDES

Ultramid® A 3L HP UV BK23220

Polyamide 66

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® A 3L HP UV BK23220 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid A3L HP UV BK23220 is an unreinforced, impact modified, UV stabilized, high flow nylon 66 for injection molding. This grade has excellent flow and improved ambient and low temperature toughness.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Impact Modifier
  • UV Stabilizer
  
Features 
  • Good Flow
  • Good Toughness
  • Impact Modified
  • Low Temperature Toughness
  
Uses 
  • Fasteners
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180
-40°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® A 3L HP UV BK23220, Ultramid A 3L HP UV BK23220, Ultramid® A , Ultramid A, UltramidA3LHPUVBK23220, UltramidA, A 3 L HP UV BK 23220, A3L HP UV BK23220, A3, 3 L HP UV BK 23220, A3LHPUVBK23220, 3L HP UV BK23220, 3L, LHP, HPUV, UVBK, BK23220, 3LHPUVBK23220, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, BASF, Polyamide66, Nylon66, L3, 3A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Flow, Good Toughness, Tough, Low Temperature Toughness.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.