Luran® HD-20 Styrolution Styrene Acrylonitrile

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress (Break, 73°F)		psi	ISO 527-2
Nominal Tensile Strain at Break (73°F)		%	ISO 527-2
Tensile Creep Modulus (1000 hr)		psi	ISO 899-1
Flexural Strength (73°F)		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow		in/in/°F	ISO 11359-2
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Dielectric Constant			IEC 60250
100 Hz
1 MHz
Dissipation Factor			IEC 60250
100 Hz
1 MHz
Electric Strength² (0.0591 in)		V/mil	IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luran® HD-20, Luran HD20, Luran® , Luran, LuranHD20, HD, HD-20, HD20, HD:20, HD/20, HD+20, HD_20, HD 20, Styrene Acrylonitrile, SAN, Styrolution, StyreneAcrylonitrile, 20HD
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²Short Time

Luran® HD-20