IDES Prospector Already have an account? Login Here

IDES

VICTREX® HT™ P22

Polyether Ketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® HT™ P22 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High performance thermoplastic material, unreinforced PolyEtherKetone (PEK), semi crystalline, coarse powder for extrusion compounding, easy flow, FDA food contact compliant, colour natural.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Features 
  • Food Contact Acceptable
  • Good Flow
  • Semi Crystalline
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Powder
Processing Method 
  • Compounding Extrusion
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress (Yield, 73°F)
psi
ISO 527-2
Tensile Strain (Break, 73°F)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180/A
Unnotched Izod Impact Strength (73°F)
 
ISO 180
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
ISO 11357-2
Melting Temperature
°F
ISO 11357-3
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
UL 94
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® HT™ P22, VICTREX HT P22, VICTREX® HT™ , VICTREX HT, VICTREXHTP22, VICTREXHT, P 22, P22, Polyether Ketone, PEK, Polyaryletherketone, PAEK, Victrex, PolyetherKetone, 22P
Features
Features may also be described by the following terms: Good Flow, Semi-Crystalline.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Crystalline
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.