IDES Prospector Already have an account? Login Here

IDES

VICOTE® 705 Blue

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICOTE® 705 Blue is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
VICOTE 705 Blue is a blue pigmented version of the VICOTE 705 grade and contains additives to help with adhesion, wetting of the substrate and shrinkage. This grade has a nominal particle size of ~ 50 microns. The powder is light blue in colour and is a low melt viscosity grade for lower film builds. Typical film thicknesses range from 50 - 80 microns. The final coating takes on a mid blue colour after stoving.

The VICTREX® PEEK™ polymer contained in the VICOTE powder coatings are thermoplastic in nature and exhibits flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

Typical properties are high continuous use temperature of 260°C, excellent wear, abrasion and cut through resistance at these high temperatures combined with excellent chemical and radiation resistance. VICOTE Coatings have a low level of extractables and are hydrolysis resistant and inherently flame retardant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Unspecified Additive
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Wear Resistance
  • Hydrolysis Resistant
  • Low Extractables
  • Low Viscosity
  • Radiation (Gamma) Resistant
Uses 
  • Coating Applications
Agency Ratings 
Appearance 
  • Blue
Processing Method 
  • Coating
  • Electrostatic Spray Coating
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Particle Size
mil
  
Thermal
Nominal Value
Unit
Test Method
Max. Continuous Use Temperature
°F
 ASTM D794
Glass Transition Temperature (DSC)
°F
 DSC
Melting Temperature
°F
 DSC
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Additional Information
Nominal Value
Unit
Test Method
Konig Hardness
min
 ISO 1522
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICOTE® 705 Blue, VICOTE 705 Blue, VICOTE® , VICOTE, VICOTE705Blue, 705 Blue, 705Blue, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Victrex, Blue705
Features
Features may also be described by the following terms: Low Viscosity, Good Wear Resistance, Wear Resistant, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable, Low Extractables.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.