IDES Prospector Already have an account? Login Here

IDES

HANWHA EVA 1328

Ethylene Vinyl Acetate Copolymer

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA EVA 1328 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HANWHA EVA 1328 is manufactured by Dow autoclave high pressure process and designed for variety of foam molding application such as shoes and sandles etc. EVA 1328 is well known for its excellent processability and high quality assurance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Additive Free
Uses 
  • Foam
  • Footwear
  
Processing Method 
  • Foam Processing
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Vinyl Acetate Content
wt%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature
°F
 ASTM D3417
Additional Information
Kneader: 80 to 110°C
Roll Mill: 90°C
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA EVA 1328, HANWHA EVA , HANWHAEVA1328, HANWHAEVA, EVA 1328, EVA1328, EVA, 1328, Ethylene Vinyl Acetate Copolymer, Polyethylene, PE, Hanwha, EthyleneVinylAcetateCopolymer, 1328EVA
Features
Features may also be described by the following terms: Additive Free, No Additives.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.