IDES Prospector Already have an account? Login Here

IDES

OMIKRON BE 937 NATURAL

Polypropylene Homopolymer

Glass Fiber Reinforcement, 40%

Supplied by TECNOPOL

The technical datasheet with complete property values for OMIKRON BE 937 NATURAL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OMIKRON BE 937 is an homopolymer polypropylene reinforced with 40% of glass fibre for injection moulding, high processability. Excellent performances in thermal and detergent resistance. It is available in natural. Coloured on demand.

OMIKRON BE 937 is suitable for moulding of items requiring stiffness and dimensional stability .
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Detergent Resistant
  • Good Dimensional Stability
  • Good Processability
  • Good Stiffness
  • Homopolymer
  • Low Temperature Resistant
Appearance 
  • Colors Available
  • Natural Color
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Aging
Nominal Value
Unit
Test Method
Accelerated Aging (302°F)
month
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON BE 937 NATURAL, OMIKRON , OMIKRONBE937NATURAL, BE 937 NATURAL, BE937, 937NATURAL, BE937NATURAL, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, TECNOPOL, PolypropyleneHomopolymer, PPHomopolymer, 937BE
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Detergent Resistant, Detergent Resistance, Low Temperature Resistant, Low Temperature Performance.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.