IDES Prospector Already have an account? Login Here

IDES

OMIKRON BG 73 NATURAL

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by TECNOPOL

The technical datasheet with complete property values for OMIKRON BG 73 NATURAL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OMIKRON BG 73 is an homopolymer polypropylene reinforced with 30% of glass fibre for injection moulding, high processability. It is available in natura. Coloured on demand.

OMIKRON BG 73 is suitable for moulding of items requiring stiffness and dimensional stability well as good aesthetic.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • Homopolymer
Appearance 
  • Black
  • Colors Available
  • Natural Color
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Aging
Nominal Value
Unit
Test Method
Accelerated Aging (302°F)
day
 ISO 4577
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON BG 73 NATURAL, OMIKRON , OMIKRONBG73NATURAL, BG 73 NATURAL, BG73, 73NATURAL, BG73NATURAL, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, TECNOPOL, PolypropyleneHomopolymer, PPHomopolymer, 73BG
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.