IDES Prospector Already have an account? Login Here

IDES

OMIKRON BMT 70 NATURAL

Polypropylene Copolymer

Glass Fiber Reinforcement, 30%

Supplied by TECNOPOL

The technical datasheet with complete property values for OMIKRON BMT 70 NATURAL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OMIKRON BMT 70 NAT is a copolymer polypropylene reinforced with 30% of glass fibre for injection moulding, good processability. It is available in natural version. Coloured on demand.

OMIKRON BMT 70 NAT is suitable for moulding of items requiring stiffness and impact resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
 
Appearance 
  • Colors Available
  • Natural Color
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
ISO 1133
Molding Shrinkage
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B
Aging
Nominal Value
Unit
Test Method
Accelerated Aging (302°F)
day
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON BMT 70 NATURAL, OMIKRON , OMIKRONBMT70NATURAL, BMT 70 NATURAL, BMT70, 70NATURAL, BMT70NATURAL, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, TECNOPOL, PolypropyleneCopolymer, PPCopolymer, 70BMT
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.