IDES Prospector Already have an account? Login Here

IDES

OMIKRON BR 744 BLACK

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by TECNOPOL

The technical datasheet with complete property values for OMIKRON BR 744 BLACK is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OMIKRON BR 744 is an homopolymer polypropylene reinforced with 30% of glass fibre for injection moulding, high processability with heat stabilization. It is available in black version. Coloured on demand.

OMIKRON BR 744 is suitable for moulding of items requiring high stiffness and tenacity. It's normally used in automotive industry , for electrical parts and where high thermal properties and low shrinkage are demands
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Good Processability
  • Good Stiffness
  • Heat Stabilized
  • Homopolymer
  • Low Shrinkage
Uses 
  • Automotive Applications
  • Electrical Parts
  
Appearance 
  • Black
  • Colors Available
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Aging
Nominal Value
Unit
Test Method
Accelerated Aging (302°F)
month
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON BR 744 BLACK, OMIKRON , OMIKRONBR744BLACK, BR 744 BLACK, BR744, 744BLACK, BR744BLACK, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, TECNOPOL, PolypropyleneHomopolymer, PPHomopolymer, 744BR
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Shrinkage.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.