OMIKRON GM 51 K BLACK TECNOPOL Polypropylene Homopolymer (Talc Filler, 20%)

Product Description

OMIKRON GM 51 K is an homopolymer polypropylene filled with 20% of talc for injection moulding, high processability. It is available in black version. Coloured on demand.

OMIKRON GM 51 K is suitable for moulding of items requiring stiffness and dimensional stability well as good aesthetic.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Talc Filler, 20% Filler by Weight

Features

Good Dimensional Stability

Good Processability

Good Stiffness

Good Surface Finish

Homopolymer

Appearance

Black

Colors Available

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Aging	Nominal Value	Unit	Test Method
Accelerated Aging (302°F)		day	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON GM 51 K BLACK, OMIKRON , OMIKRONGM51KBLACK, GM 51 K BLACK, GM51, 51K, KBLACK, GM51KBLACK, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, TECNOPOL, PolypropyleneHomopolymer, PPHomopolymer, 51GM
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish.

Notes

¹Typical properties: these are not to be construed as specifications.

OMIKRON GM 51 K BLACK

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by TECNOPOL