OMIKRON HR 50 NAT TECNOPOL Polypropylene Homopolymer (Talc Filler, 20%)

Product Description

OMIKRON HR 50 is an homopolymer polypropylene filled with 20% of talc for injection moulding, high processability. It is available in natural version. Coloured on demand.

OMIKRON HR 50 is suitable for moulding of items requiring stiffness and dimensional stability well as good aesthetic.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Talc Filler, 20% Filler by Weight

Features

Good Dimensional Stability

Good Processability

Good Stiffness

Good Surface Finish

Homopolymer

Appearance

Colors Available

Natural Color

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B
Aging	Nominal Value	Unit	Test Method
Accelerated Aging (302°F)		day	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OMIKRON HR 50 NAT, OMIKRON , OMIKRONHR50NAT, HR 50 NAT, HR50, 50NAT, HR50NAT, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, TECNOPOL, PolypropyleneHomopolymer, PPHomopolymer, 50HR
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Surface Finish.

Notes

¹Typical properties: these are not to be construed as specifications.

OMIKRON HR 50 NAT

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by TECNOPOL