IDES Prospector Already have an account? Login Here

IDES

SABIC® PC PC1003R Resin

Polycarbonate

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for SABIC® PC PC1003R Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC1003R resin is a medium-low flow (MFR = 10 at 300°C/1.2kg), heat and UV stabilized, polycarbonate product with mold release designed for use in the general purpose molding market. It is available exclusively at www.sabicpc.com
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Heat Stabilizer
  • Mold Release
  • UV Stabilizer
Features 
  • Medium Flow
Uses 
  • General Purpose
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ASTM D1238
Melt Volume-Flow Rate (MVR) (300°C/1.2 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
     Internal Method
-- 2
in/in
  
0.126 in
in/in
  
Water Absorption
      
Saturation, 73°F
%
 ISO 62
Equilibrium, 73°F
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 4
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 5
psi
 ASTM D790
-- 6
psi
 ISO 178
Flexural Strength
      
-- 6, 7
psi
 ISO 178
Yield, 1.97 in Span 5
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
-22°F 8
ft·lb/in²
 ISO 180/1A
73°F 8
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
 
 ASTM D4812, ISO 180/1U
-22°F 8
 
 ISO 180/1U
Instrumented Dart Impact (73°F, Energy at Peak Load)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785, ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 9
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 9
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B50, ASTM D1525 10
Ball Pressure Test (257°F)
 
 IEC 60695-10-2
CLTE - Flow
      
-40 to 203°F
in/in/°F
 ASTM E831
73 to 176°F
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177, ISO 8302
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257, IEC 60093
Dielectric Strength (0.0630 in)
V/mil
 ASTM D149, IEC 60243-1
Dielectric Constant
     ASTM D150, IEC 60250
60 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150, IEC 60250
60 Hz
 
  
1 MHz
 
  
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ASTM D542, ISO 489
Transmittance (100 mil)
%
 ASTM D1003
Haze (100 mil)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PC PC1003R Resin, SABIC PC PC1003R Resin, SABIC® PC , SABIC PC, SABICPCPC1003RResin, SABICPC, PCPC 1003 R Resin, PCPC1003R Resin, PCPC1003, PC, PC 1003 R Resin, PCPC1003RResin, PC1003R Resin, PC1003, 1003R, RResin, PC1003RResin, Polycarbonate, SABIC IP Asia, 1003PC, 1003PCPC
Features
Features may also be described by the following terms: Medium Flow, Medium Melt, Medium MFI.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
32.0 in/min
4Type I, 2.0 in/min
50.051 in/min
60.079 in/min
7Yield
880*10*3
980*10*4 mm
10Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.