POLYFORT® FIPP 10 T A. Schulman Eur Polypropylene Copolymer (Mineral Filler, 10%)

Product Description

10% talc filled PP-Copolymer, very high flow

General

Material Status

Availability

Filler / Reinforcement

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Burning Rate		in/min	ISO 3795
Glow Wire Flammability Index		°F	IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FIPP 10 T, POLYFORT FIPP 10 T, POLYFORT® , POLYFORT, POLYFORTFIPP10T, FIPP 10 T, FIPP10, 10T, FIPP10T, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneCopolymer, PPCopolymer, 10FIPP

Notes

¹Typical properties: these are not to be construed as specifications.

POLYFORT® FIPP 10 T