POLYFORT® FIPP 20 T LE K1832 A. Schulman Eur Polypropylene Copolymer (Talc Filler, 20%)

Product Description

20% talc filled high impact and low emission PP-Copolymer; good scratch resistance and UV-stability especiality for automotiv interior parts

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)			ISO 179/1eU
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/Af
Vicat Softening Temperature		°F	ISO 306/A50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Burning Rate (0.0787 in)		in/min	ISO 3795
Flammability Classification			IEC 60695-11-10, -20
0.0591 in
0.118 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FIPP 20 T LE K1832, POLYFORT FIPP 20 T LE K1832, POLYFORT® , POLYFORT, POLYFORTFIPP20TLEK1832, FIPP 20 T LE K 1832, FIPP 20 T LE K1832, FIPP20, 20T, TLE, LEK, K1832, FIPP20TLEK1832, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneCopolymer, PPCopolymer, 20FIPP
Features
Features may also be described by the following terms: Scratch Resistant, Resists Scratches, High Impact Resistance, Low Emissions.

Notes

¹Typical properties: these are not to be construed as specifications.

POLYFORT® FIPP 20 T LE K1832