POLYFORT® FIPP MKF 4025 A. Schulman Eur Polypropylene Copolymer (Glass\Mineral, 40%)

Product Description

40% glass fibre and mineral reinforced PP-Copolymer reduced warpage

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain (Break)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Burning Rate (0.0787 in)		in/min	ISO 3795
Flammability Classification			IEC 60695-11-10, -20
0.0591 in
0.118 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FIPP MKF 4025, POLYFORT FIPP MKF 4025, POLYFORT® , POLYFORT, POLYFORTFIPPMKF4025, FIPP MKF 4025, FIPPMKF, MKF4025, FIPPMKF4025, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneCopolymer, PPCopolymer, MKFFIPP
Features
Features may also be described by the following terms: High Strength, Low Warpage, Low Warp, Ultra High Toughness.

Notes

¹Typical properties: these are not to be construed as specifications.

POLYFORT® FIPP MKF 4025