POLYFORT® FPP 10 TFA K1741 A. Schulman Eur Polypropylene Homopolymer (Talc Filler, 10%)

Product Description

10% talc filled PP-Homopolymer, very high flow and antistatic

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Flammability	Nominal Value	Unit	Test Method
Burning Rate		in/min	ISO 3795
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYFORT® FPP 10 TFA K1741, POLYFORT FPP 10 TFA K1741, POLYFORT® , POLYFORT, POLYFORTFPP10TFAK1741, FPP 10 TFA K 1741, FPP 10 TFA K1741, FPP10, 10TFA, TFAK, K1741, FPP10TFAK1741, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, A. Schulman Eur, PolypropyleneHomopolymer, PPHomopolymer, 10FPP
Features
Features may also be described by the following terms: Good Flow.

Notes

¹Typical properties: these are not to be construed as specifications.

POLYFORT® FPP 10 TFA K1741