IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE BD2450AA

Linear Low Density Polyethylene

Supplied by Shazand (Arak) Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE BD2450AA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BD24250AA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer.
BD24250AA is suitable for high flow injection moulding applications such as house wares, boxes and closures.
The superior stress crack resistance makes it particularly good for caps and closures.

* BD24250AA is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Butene Comonomer
  • Copolymer
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Flow
Uses 
  • Caps
  • Closures
  • Containers
  • Household Goods
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Related Terminology
This supplier and product may also be known by these terms: Arak Petrochemical

Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE BD2450AA, Arak LLDPE , ArakLLDPEBD2450AA, ArakLLDPE, LLDPEBD 2450 AA, LLDPEBD2450AA, LLDPEBD2450, LLDPE, BD 2450 AA, BD2450AA, BD2450, 2450AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Shazand (Arak) Petrochemical, PolyethyleneLinearLowDensity, 2450BD, 2450LLDPEBD
Features
Features may also be described by the following terms: Butene Comonomer, High Flow, High Melt, High MFI, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.