IDES Prospector Already have an account? Login Here

IDES

Xiran® SZ 22065

Styrene Maleic Anhydride

Supplied by Polyscope Polymers BV

The technical datasheet with complete property values for Xiran® SZ 22065 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
XIRAN® SZ grades are non-modified, random SMA (Styrene Maleic Anhydride) resins for enhancing temperature and dimensional stability, surface adhesion properties and melt viscosity in a number of polymer systems like ABS, PMMA, PA and PVC. XIRAN® SZ grades are also applied in water based applications in solution or dispersion.
XIRAN® SZ 22065 is for example applied as compatibilizer in PC/ABS, PA/ABS and as a dispersant for pigments, fillers and flame retardants in many polymer matrices.
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Features 
  • Good Adhesion
  • Good Dimensional Stability
  • High Heat Resistance
  • High Viscosity
  
Uses 
  • Plastics Modification
Appearance 
  • White
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 Internal Method
Melt Mass-Flow Rate (MFR)
      
230°C/2.16 kg
g/10 min
 ASTM D1238
240°C/10.0 kg
g/10 min
 ISO 1133
Viscosity Number (Reduced Viscosity)
ml/g
 ISO 1628
Maleic Anhydride Content
%
 Internal Method
Moisture Content
ppm
 ISO 760
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 ISO 3146
Vicat Softening Temperature
°F
 ISO 306/B
Optical
Nominal Value
Unit
Test Method
Haze (78.7 mil)
%
 ASTM D1003
Whiteness Index 2
 
 ASTM D1925
Yellowness Index (0.0787 in)
YI
 ASTM D1925
Optical Transmission (78.7 mil)
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Oligomer Content
%
 Internal Method
Polydispersity - (Mw/Mn)
 
 ISO 13885-1
Volatiles
ppm
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xiran® SZ 22065, Xiran SZ 22065, Xiran® , Xiran, XiranSZ22065, SZ 22065, SZ22065, Styrene Maleic Anhydride, SMA, smah, Polyscope, StyreneMaleicAnhydride, 22065SZ
Features
Features may also be described by the following terms: Good Adhesion, High Heat Resistance, High Viscosity, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Extrusion Notes
Maximum Processing temperature: 280°C
Notes
1Typical properties: these are not to be construed as specifications.
22 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.