IDES Prospector Already have an account? Login Here

IDES

RALUPOL® UP 4385

Polyester Alloy

Glass\Inorganic

Supplied by RASCHIG GmbH

The technical datasheet with complete property values for RALUPOL® UP 4385 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Applications
Moulded parts in electrical engineering with high heat resistance and high mechanical strength i.e.
  • Contact terminals
  • Relays
  • Automatic cut-outs (FI/LS)

Product characteristics
Short glass fibre reinforced, inorganically filled UP moulding compound in grey (RAL 7035) and dark colours
Very low mould shrinkage and post- -shrinkage, very high arc resistance, very high mechanical values, better than UP 804
Self-extinguishing (V-0/0,8 according to UL 94), UL-listed in all colours
Limiting oxygen index >70%
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass\Inorganic
Features 
  • Good Electrical Properties
  • Halogen Free
  • Low Shrinkage
  • Non-Toxic
  • Self Extinguishing
Uses 
  • Caps
  • Connectors
  • Electrical Parts
  • Engineering Parts
  
Appearance 
  • Colors Available
  • Grey
  
Forms 
  • Granules
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Molding Shrinkage
     ISO 294-4
-- 2
%
  
-- 3
%
  
-- 4
%
  
Water Absorption 5 (73°F)
mg
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2
-4°F, Injection Molded
psi
  
73°F, Injection Molded
psi
  
140°F, Injection Molded
psi
  
Tensile Stress
     ISO 527-2
Yield, -4°F, Injection Molded
psi
  
Yield, 73°F, Compression Molded
psi
  
Yield, 73°F, Injection Molded
psi
  
Yield, 140°F, Injection Molded
psi
  
Tensile Strain
     ISO 527-2
Break, -4°F, Compression Molded
%
  
Break, -4°F, Injection Molded
%
  
Break, 73°F, Compression Molded
%
  
Break, 73°F, Injection Molded
%
  
Break, 140°F, Compression Molded
%
  
Break, 140°F, Injection Molded
%
  
Flexural Modulus
     ISO 178
-4°F, Compression Molded
psi
  
-4°F, Injection Molded
psi
  
73°F, Compression Molded
psi
  
73°F, Injection Molded
psi
  
140°F, Compression Molded
psi
  
140°F, Injection Molded
psi
  
Flexural Strength
     ISO 178
140°F, Compression Molded
psi
  
-4°F, Compression Molded
psi
  
73°F, Compression Molded
psi
  
140°F, Injection Molded
psi
  
-4°F, Injection Molded
psi
  
73°F, Injection Molded
psi
  
Compressive Stress (73°F)
psi
 ISO 604
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-40°F, Compression Molded
ft·lb/in²
  
-40°F, Injection Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
176°F, Compression Molded
ft·lb/in²
  
176°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-40°F, Compression Molded
ft·lb/in²
  
-40°F, Injection Molded
ft·lb/in²
  
73°F, Compression Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
176°F, Compression Molded
ft·lb/in²
  
176°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness 6
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
1160 psi, Unannealed
°F
 ISO 75-2/C
Maximum Use Temperature
     IEC 216
-- 7
°F
  
-- 8
°F
  
CLTE - Flow (68 to 158°F)
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN 52612
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (100 Hz)
 
 IEC 60250
Dissipation Factor (100 Hz)
 
 IEC 60250
Arc Resistance
sec
 ASTM D495
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Needle Flame Test
 
 VDE 0471/2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
Glow Wire Ignition Temperature
°F
 VDE 0471/2
Oxygen Index
%
 ISO 4589-2
Additional Information
Nominal Value
Unit
Test Method
Glow Wire Test - BH1
in
 IEC 707
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RALUPOL® UP 4385, RALUPOL UP 4385, RALUPOL® , RALUPOL, RALUPOLUP4385, UP 4385, UP4385, Polyester Alloy, Polyester, RASCHIG, PolyesterAlloy, 4385UP
Features
Features may also be described by the following terms: Low Shrinkage, Good Electrical Properties, Self Extinguishing, Self-Extinguishing, Zero Halogen Content, Halogen Free, Non-Toxic, Non Toxic, Toxicity None.
Uses
Uses may also be described by the following terms: Engineering Parts, Closure Caps, Caps, Cap.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Barrel Temperature: 60 - 80°C to 80 - 100°C
Notes
1Typical properties: these are not to be construed as specifications.
2Post-shrink
3Injection molded
4Compression molded
596 hrs
623°C
7< 50 hrs, T1
820000 hrs, T1
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.