IDES Prospector Already have an account? Login Here

IDES

RALUPOL® UP 4796

Polyester Alloy

Glass\Inorganic

Supplied by RASCHIG GmbH

The technical datasheet with complete property values for RALUPOL® UP 4796 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Applications
Moulded parts in the automotive industry with high heat resistance and high mechanical strength, eg.
  • Distributor caps
  • Spark plug connectors

Product characteristics
Short glass fibre reinforced, inorganically filled UP moulding compound
Low mould shrinkage and post-shrinkage, good electrical values, good mechanical
strength, better than UP 802
Free of halogens and toxic heavy metals
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass\Inorganic
Features 
  • Good Electrical Properties
  • Halogen Free
  • High Heat Resistance
  • High Strength
  • Low Shrinkage
  • Non-Toxic
Uses 
  • Automotive Electronics
  • Caps
  • Connectors
Appearance 
  • Colors Available
  • Grey
  
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Molding Shrinkage
     ISO 294-4
-- 2
%
  
-- 3
%
  
Water Absorption 4 (73°F)
mg
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2
Flexural Modulus (73°F, Injection Molded)
psi
 ISO 178
Flexural Strength (73°F, Injection Molded)
psi
 ISO 178
Compressive Stress (73°F)
psi
 ISO 604
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness 5
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
1160 psi, Unannealed
°F
 ISO 75-2/C
Maximum Use Temperature
     IEC 216
-- 6
°F
  
-- 7
°F
  
CLTE - Flow (68 to 158°F)
in/in/°F
 ISO 11359-2
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN 52612
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (100 Hz)
 
 IEC 60250
Dissipation Factor (100 Hz)
 
 IEC 60250
Comparative Tracking Index
V
 IEC 60112
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Needle Flame Test
 
 VDE 0471/2
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature
°F
 VDE 0471/2
Additional Information
Nominal Value
Unit
Test Method
Glow Wire Test - BH2
in
 IEC 707
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RALUPOL® UP 4796, RALUPOL UP 4796, RALUPOL® , RALUPOL, RALUPOLUP4796, UP 4796, UP4796, Polyester Alloy, Polyester, RASCHIG, PolyesterAlloy, 4796UP
Features
Features may also be described by the following terms: Low Shrinkage, Good Electrical Properties, High Strength, High Heat Resistance, Zero Halogen Content, Halogen Free, Non-Toxic, Non Toxic, Toxicity None.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Barrel Temperature: 60 - 80°C to 80 - 100°C
Notes
1Typical properties: these are not to be construed as specifications.
2Post-shrink
3Injection molded
496 hrs
523°C
6< 50 hrs, T1
720000 hrs, T1
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.