IDES Prospector Already have an account? Login Here

IDES

DECAL AMC 2572

Polyester Alloy

Glass\Inorganic

Supplied by RASCHIG GmbH

The technical datasheet with complete property values for DECAL AMC 2572 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Applications
  • Thermostat housings
  • Switch parts
  • Relays

Product characteristics
Glass fibre-reinforced and inorganically filled UP moulding compound in various colours
Very good mechanical strength, very good electrical properties and dimensional stability, good abrasion stability,high flame retardance in combination with low fume toxicity (RATP*) approved), outstanding processability - optimized for automatic processing (*) Régie Autonome des Transports Parisiens
Self-extinguishing (V-0/1.1 according to UL 94)
Free of halogens and toxic heavy metals
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass\Inorganic
Features 
  • Flame Retardant
  • Good Abrasion Resistance
  • Good Dimensional Stability
  • Good Electrical Properties
  • Good Processability
  • Halogen Free
  • High Strength
  • Low to No Fumes
  • Non-Toxic
  • Self Extinguishing
Uses 
  • Electrical Housing
  • Electrical Parts
  • Switches
Appearance 
  • Colors Available
Forms 
  • Granules
Processing Method 
  • Injection Molding
  • Resin Transfer Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Molding Shrinkage
     ISO 294-4
-- 2
%
  
-- 3
%
  
Water Absorption - 24 hrs (73°F)
mg
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2
Flexural Modulus (73°F, Injection Molded)
psi
 ISO 178
Flexural Strength (73°F, Injection Molded)
psi
 ISO 178
Compressive Stress (73°F)
psi
 ISO 604
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Unannealed
°F
 ISO 75-2/A
1160 psi, Unannealed
°F
 ISO 75-2/C
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (1 kHz)
 
 IEC 60250
Dissipation Factor (1 kHz)
 
 IEC 60250
Comparative Tracking Index
     IEC 60112
-- 4
V
  
--
V
  
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0433 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DECAL AMC 2572, DECAL , DECALAMC2572, AMC 2572, AMC2572, Polyester Alloy, Polyester, RASCHIG, PolyesterAlloy, 2572AMC
Features
Features may also be described by the following terms: High Strength, Good Electrical Properties, Good Dimensional Stability, Dimensionally Stable, Good Processability, Easy Processing, Self Extinguishing, Self-Extinguishing, Zero Halogen Content, Halogen Free, Non-Toxic, Non Toxic, Toxicity None, Good Abrasion Resistance, Abrasion Resistant, Low Fumes.
Uses
Uses may also be described by the following terms: Electrical Housings, Electrical Housing.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Barrel Temperature: 50 - 70°C to 80 - 100°C
Notes
1Typical properties: these are not to be construed as specifications.
2Post-shrink
3Injection molded
4CTI-M
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.