IDES Prospector Already have an account? Login Here

IDES

DECAL EPOXY 3536

Epoxy; Epoxide

Glass\Inorganic

Supplied by RASCHIG GmbH

The technical datasheet with complete property values for DECAL EPOXY 3536 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Applications
  • Encapsulation of electrical and mechanical devices, such as coils and resistors

Product characteristics
Glass fibre-reinforced and inorganically filled epoxy moulding compound (EP) in colour black
Good mechanical strength, long term retention of electrical properties and dimensional stability also at high temperatures
Self-extinguishing
Free of halogens and toxic heavy metals
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass\Inorganic
Features 
  • Good Dimensional Stability
  • Good Electrical Properties
  • Good Strength
  • Halogen Free
  • Non-Toxic
  • Self Extinguishing
Uses 
  • Electrical/Electronic Applications
Appearance 
  • Black
Forms 
  • Granules
Processing Method 
  • Compression Molding
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Molding Shrinkage
     ISO 294-4
-- 2
%
  
-- 3
%
  
Water Absorption - 24 hrs (73°F)
mg
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2
Flexural Modulus (73°F, Injection Molded)
psi
 ISO 178
Flexural Strength (73°F, Injection Molded)
psi
 ISO 178
Compressive Stress (73°F)
psi
 ISO 604
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Unannealed
°F
 ISO 75-2/A
1160 psi, Unannealed
°F
 ISO 75-2/C
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Dielectric Constant (1 kHz)
 
 IEC 60250
Dissipation Factor (100 Hz)
 
 IEC 60250
Comparative Tracking Index
     IEC 60112
-- 4
V
  
--
V
  
Electric Strength (0.0394 in)
V/mil
 IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: DECAL EPOXY 3536, DECAL , DECALEPOXY3536, EPOXY 3536, EPOXY3536, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, RASCHIG, EpoxyEpoxide, 3536EPOXY
Features
Features may also be described by the following terms: Good Strength, Good Electrical Properties, Good Dimensional Stability, Dimensionally Stable, Self Extinguishing, Self-Extinguishing, Zero Halogen Content, Halogen Free, Non-Toxic, Non Toxic, Toxicity None.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Barrel Temperature: 40 - 60°C to 70 - 90°C
Notes
1Typical properties: these are not to be construed as specifications.
2Post-shrink
3Injection molded
4CTI-M
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.