IDES Prospector Already have an account? Login Here

IDES

WEVO-CHEMIE Epoxy VE/263

Epoxy; Epoxide

Supplied by WEVO-CHEMIE GmbH

The technical datasheet with complete property values for WEVO-CHEMIE Epoxy VE/263 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Elasticity
Uses 
  • Automotive Applications
  • Coating Applications
  • Electrical Parts
  • Electrical/Electronic Applications
  
Forms 
  • Liquid
Physical
Nominal Value
Unit
Test Method
Density
      
-- 2
g/cm³
  
-- 3
g/cm³
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 DIN 53455
Flexural Strength
psi
 DIN 53452
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Thermal Conductivity
Btu·in/hr/ft²/°F
 DIN VDE 0304, TI.1
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (72°F, 50 Hz)
 
 IEC 60250
Electric Strength
V/mil
 IEC 60243-1
Thermoset
Nominal Value
Unit
Test Method
Pot Life (72°F)
min
  
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity 4 (71.6°F)
Pa·s
  
Additional Information
Nominal Value
Unit
Test Method
Cure Temperature
°F
  
Mixing Ratio
 
  
Temperature Range - of use
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WEVO-CHEMIE Epoxy VE/263, WEVOCHEMIE Epoxy VE263, WEVO-CHEMIE Epoxy , WEVOCHEMIE Epoxy, WEVO:CHEMIE Epoxy, WEVO/CHEMIE Epoxy, WEVO+CHEMIE Epoxy, WEVO_CHEMIE Epoxy, WEVO CHEMIE Epoxy, WEVOCHEMIEEpoxyVE263, WEVOCHEMIEEpoxy, WEVO_CHEMIEEpoxy, VE, EpoxyVE/263, EpoxyVE263, EpoxyVE:263, EpoxyVE+263, EpoxyVE-263, EpoxyVE_263, EpoxyVE 263, EpoxyVE, VE/263, VE263, VE:263, VE+263, VE-263, VE_263, VE 263, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, WEVO-CHEMIE, EpoxyEpoxide, 263VE, 263EpoxyVE
Features
Features may also be described by the following terms: High Elasticity, Highly Elastic.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Hardener
3Resin
4Rotating Viscosity-meter
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.