IDES Prospector Already have an account? Login Here

IDES

Arak HDPE BL2

High Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak HDPE BL2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BL2 is a high density polyethylene grade, suitable for blow moulding applications.
Characteristics:
  • High rigidity.
  • Good flow ability.
  • Good impact strength.
  • Good stress cracking resistance.
Typical applications are:
  • Disinfectant bottles up to 2 litres capacity.
  • Containers up to 50 litres.
  • Petrol cans up to 5 litres.

* BL2 is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Food Contact Acceptable
  • Good Flow
  • Good Impact Resistance
  • High ESCR (Stress Crack Resist.)
  • High Rigidity
Uses 
  • Blow Molding Applications
  • Bottles
  • Containers
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 DIN 53735
Environmental Stress-Cracking Resistance 2 (158°F)
hr
 Internal Method
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 DIN 53453
Optical
Nominal Value
Unit
Test Method
Yellowness Index
YI
 DIN 6167
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak HDPE BL2, Arak HDPE , ArakHDPEBL2, ArakHDPE, HDPEBL 2, HDPEBL2, HDPE, BL 2, BL2, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, Arak Petrochemical, PolyethyleneHighDensity, 2BL, 2HDPEBL
Features
Features may also be described by the following terms: Good Flow, High Rigidity, Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
2plax, 0.5 bar
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.