IDES Prospector Already have an account? Login Here

IDES

Arak HDPE BL6

High Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak HDPE BL6 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BL6 is a high density polyethylene grade with high molecular weight, suitable for blow moulding applications.
Characteristics:
  • High toughness.
  • Good impact strength.
  • Good stress cracking resistance.
Typical applications are:
  • Large containers above 10 litres capacity.
  • Semi-finished stocks.

* BL6 is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Toughness
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
Uses 
  • Blow Molding Applications
  • Containers
  • Stock Material for Machining
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 DIN 53479
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)
g/10 min
 DIN 53735
Environmental Stress-Cracking Resistance 2 (158°F)
hr
 Internal Method
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 DIN 53453
Optical
Nominal Value
Unit
Test Method
Yellowness Index
YI
 DIN 6167
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak HDPE BL6, Arak HDPE , ArakHDPEBL6, ArakHDPE, HDPEBL 6, HDPEBL6, HDPE, BL 6, BL6, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, Arak Petrochemical, PolyethyleneHighDensity, 6BL, 6HDPEBL
Features
Features may also be described by the following terms: Good Toughness, Tough, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Impact Resistance, High Molecular Weight, High MW.
Notes
1Typical properties: these are not to be construed as specifications.
2plax, 0.5 bar
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.