Arak LLDPE HD5050UA Arak Petrochemical Polyethylene, High Density

Product Description

HD5050UA is an ultra-violet light stabilised high density polyethylene copolymergrade with a narrow molecular weight distribution, specially developed forinjection moulding applications where a good resistance to environmental stress cracking is required.
Characteristics:

Good environmental stress cracking resistance.

High impact resistance, especially at low temperatures.

Good weathering resistance.

Typical applications are:

Large dustbins & pails.

Pallet boxes.

Caps & closures.

Fish crates.

Technical parts.

* HD5050UA is suitable for food contact.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Additive

UV Stabilizer

Features

Copolymer

Food Contact Acceptable

Good UV Resistance

Good Weather Resistance

High ESCR (Stress Crack Resist.)

High Impact Resistance

Low Temperature Impact Resistance

Narrow Molecular Weight Distribution

Uses

Caps

Closures

Containers

Crates

Engineering Parts

Pails

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ASTM D256
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)			ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE HD5050UA, Arak LLDPE , ArakLLDPEHD5050UA, ArakLLDPE, LLDPEHD 5050 UA, LLDPEHD5050UA, LLDPEHD5050, LLDPE, HD 5050 UA, HD5050UA, HD5050, 5050UA, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Arak Petrochemical, PolyethyleneHighDensity, 5050HD, 5050LLDPEHD
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Engineering Parts.

Notes

¹Typical properties: these are not to be construed as specifications.

Arak LLDPE HD5050UA

High Density Polyethylene

Supplied by Arak Petrochemical Corporation