IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE HD5211EA

High Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE HD5211EA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD5211EA is a high density polyethylene copolymer grade with a narrow molecular weight distribution, suitable for a wide range of injection moulding applications.
Characteristics:
  • Good flow.
  • Good impact strength.
Typical applications are:
  • House wares.
  • Caps & closures.
  • Toys.
  • Pails.
  • Cartridges.

* HD5211EA is not suitable for organoleptic applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Copolymer
  • Good Flow
  • Good Impact Resistance
  • Narrow Molecular Weight Distribution
  
Uses 
  • Caps
  • Closures
  • Household Goods
  • Pails
  • Printer Parts
  • Toys
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE HD5211EA, Arak LLDPE , ArakLLDPEHD5211EA, ArakLLDPE, LLDPEHD 5211 EA, LLDPEHD5211EA, LLDPEHD5211, LLDPE, HD 5211 EA, HD5211EA, HD5211, 5211EA, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Arak Petrochemical, PolyethyleneHighDensity, 5211HD, 5211LLDPEHD
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Flow, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.