IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE HD5813EA

High Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE HD5813EA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HD5813EA is an easy flow high density polyethylene copolymer grade with a narrow molecular weight distribution, for injection moulding applications.
Characteristics:
  • High flow.
  • High rigidity.
  • High warpage resistance.
Typical applications are:
  • House wares.
  • Aerosol caps, closures.

* HD5813EA is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Copolymer
  • Food Contact Acceptable
  • High Flow
  • High Rigidity
  • Narrow Molecular Weight Distribution
  • Warp Resistant
Uses 
  • Caps
  • Closures
  • Household Goods
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE HD5813EA, Arak LLDPE , ArakLLDPEHD5813EA, ArakLLDPE, LLDPEHD 5813 EA, LLDPEHD5813EA, LLDPEHD5813, LLDPE, HD 5813 EA, HD5813EA, HD5813, 5813EA, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Arak Petrochemical, PolyethyleneHighDensity, 5813HD, 5813LLDPEHD
Features
Features may also be described by the following terms: High Rigidity, High Flow, High Melt, High MFI, Narrow Molecular Weight Distribution, Narrow MW Distribution, Warp Resistant, Warpage Resistant.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Closure Caps, Caps, Cap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.