IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE LL0220AA

Linear Low Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE LL0220AA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL0220AA is a linear low density polyethylene copolymer containing butene-1 as a co-monomer.
LL0220AA has been specially developed for production of hand wrap and other cast stretch films such as oriented tapes. It can also be used as a blending partner in LDPE or LLDPE in both cast and blown film applications.

LL0220AA offers the following advantages when it processed by the cast extrusion process:
  • Good balance of mechanical properties.
  • Good optical properties.
  • Good cling performance.

LL0220AA also can be used as compounds for low voltage power cable insulation or fibre optic jacketing.
LL0220AA should be processed in machinery designed for LLDPE.

Melt temperature range in the cast process are normally 240°C-280°C and in lean blends for blown film are 165°C-215°C.

LL0220AA should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.

* LL0220AA is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Butene Comonomer
  • Copolymer
  • Food Contact Acceptable
  • High Cling
  • Opticals
Uses 
  • Blending
  • Cable Jacketing
  • Cast Film
  • Film
  • Stretch Wrap
  • Tape
Processing Method 
  • Blown Film
  • Film Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Tensile Strength
    ASTM D882
MD: Yield
psi
 
TD: Yield
psi
 
MD: Break
psi
 
TD: Break
psi
 
Tensile Elongation
    ASTM D882
MD: Break
%
 
TD: Break
%
 
Elmendorf Tear Strength
    ASTM D1922
MD: 0.98 mil
g
 
TD: 0.98 mil
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
ASTM D2457
Haze
%
ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Blown Film Melt Temperature
°F
 
Cast Film Melt Temperature
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE LL0220AA, Arak LLDPE , ArakLLDPELL0220AA, ArakLLDPE, LLDPELL 0220 AA, LLDPELL0220AA, LLDPELL0220, LLDPE, LL 0220 AA, LL0220AA, LL0220, 0220AA, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, Arak Petrochemical, PolyethyleneLinearLowDensity, 0220LL, 0220LLDPELL
Features
Features may also be described by the following terms: Butene Comonomer, High Cling.
Uses
Uses may also be described by the following terms: Stretch Wrap, Cast Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.