IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE LL0410AA / LL0410KJ

Linear Low Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE LL0410AA / LL0410KJ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL0410AA & LL0410KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.
LL0410AA & LL0410KJ are suitable for thin and stiff blown films because of their good draw down properties. LL0410AA also can be used for applications such as carrier bags and garment wraps. LL0410KJ contains slip and anti-blocking agents for better opening properties.

Recommended melt temperature for extrusion is about 180°C - 225°C.

LL0410AA & LL0410KJ should be stored in the dry condition below the 50°C and avoided from the exposure of direct sunlight.

* LL0410AA & LL0410KJ are suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Butene Comonomer
  • Copolymer
  • Food Contact Acceptable
  • Good Drawdown
  • Slip
Uses 
  • Bags
  • Film
  • Laundry Bags
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE LL0410AA / LL0410KJ, Arak LLDPE LL0410AA LL0410KJ, Arak LLDPE , ArakLLDPELL0410AALL0410KJ, ArakLLDPE, LL 0410 AA, LLDPELL 0410 AA LL 0410 KJ, LLDPELL 0410 AA, LL0410AA, LLDPELL0410AA / LL0410KJ, LLDPELL0410AA LL0410KJ, LLDPELL0410AA : LL0410KJ, LLDPELL0410AA + LL0410KJ, LLDPELL0410AA - LL0410KJ, LLDPELL0410AA _ LL0410KJ, LLDPELL0410AA LL0410KJ, LLDPELL0410, LLDPELL0410AA, LL 0410 AA LL 0410 KJ, LLDPELL0410AALL0410KJ, LL0410AA / LL0410KJ, LL0410AA LL0410KJ, LL0410AA : LL0410KJ, LL0410AA + LL0410KJ, LL0410AA - LL0410KJ, LL0410AA _ LL0410KJ, LL0410AA LL0410KJ, LL0410, 0410AA, AALL, 0410KJ, LLDPELL0410AA_LL0410KJ, LL0410AALL0410KJ, LL0410AA_LL0410KJ, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Arak Petrochemical, PolyethyleneLinearLowDensity, 0410LL, 0410LLDPELL
Features
Features may also be described by the following terms: Butene Comonomer, Good Drawdown, Good draw down, Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock.
Uses
Uses may also be described by the following terms: Laundry Bags.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.