IDES Prospector Already have an account? Login Here

IDES

Arak LLDPE LL0640AA / LL0640KJ

Linear Low Density Polyethylene

Supplied by Arak Petrochemical Corporation

The technical datasheet with complete property values for Arak LLDPE LL0640AA / LL0640KJ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LL0640AA & LL0640KJ are linear low density polyethylene copolymers containing butene-1 as a co-monomer.

LL0640AA & LL0640KJ have been specially designed for the production of high quality cast films, such as display packaging, bubble film and non cling layer for stretch film.

LL0640AA & LL0640KJ have the following advantages:
  • High melt flow rate for high output cast extrusion.
  • Excellent combination of strengths and stiffness.
  • High gloss and clarity.

If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
Melt temperature range in the cast process are normally 220°C-260°C and in lean blends for blown film are 160°C-215°C.

LL0640AA & LL0640KJ should be stored in the dry condition below the 50°C andavoided from the exposure of direct sunlight.

* LL0640AA & LL0640KJ are suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
Features 
  • Butene Comonomer
  • Copolymer
  • Food Contact Acceptable
  • High Clarity
  • High Flow
  • High Gloss
  • High Stiffness
  • High Strength
Uses 
  • Cast Film
  • Film
  • Packaging
  • Stretch Wrap
  
Processing Method 
  • Blown Film
  • Cast Film
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D2838
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Yield
psi
  
TD: Yield
psi
  
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Additional Information
Nominal Value
Unit
Test Method
Blown Film Melt Temperature
°F
  
Cast Film Melt Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Arak LLDPE LL0640AA / LL0640KJ, Arak LLDPE LL0640AA LL0640KJ, Arak LLDPE , ArakLLDPELL0640AALL0640KJ, ArakLLDPE, LL 0640 AA, LLDPELL 0640 AA LL 0640 KJ, LLDPELL 0640 AA, LL0640AA, LLDPELL0640AA / LL0640KJ, LLDPELL0640AA LL0640KJ, LLDPELL0640AA : LL0640KJ, LLDPELL0640AA + LL0640KJ, LLDPELL0640AA - LL0640KJ, LLDPELL0640AA _ LL0640KJ, LLDPELL0640AA LL0640KJ, LLDPELL0640, LLDPELL0640AA, LL 0640 AA LL 0640 KJ, LLDPELL0640AALL0640KJ, LL0640AA / LL0640KJ, LL0640AA LL0640KJ, LL0640AA : LL0640KJ, LL0640AA + LL0640KJ, LL0640AA - LL0640KJ, LL0640AA _ LL0640KJ, LL0640AA LL0640KJ, LL0640, 0640AA, AALL, 0640KJ, LLDPELL0640AA_LL0640KJ, LL0640AALL0640KJ, LL0640AA_LL0640KJ, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Arak Petrochemical, PolyethyleneLinearLowDensity, 0640LL, 0640LLDPELL
Features
Features may also be described by the following terms: Butene Comonomer, High Flow, High Melt, High MFI, High Strength, High Clarity, High Gloss, High Stiffness.
Uses
Uses may also be described by the following terms: Stretch Wrap, Cast Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.