IDES Prospector Already have an account? Login Here

IDES

Ablebond 965-1L

Epoxy; Epoxide

Supplied by Henkel Ablestik

The technical datasheet with complete property values for Ablebond 965-1L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ABLEBOND® 965-1L electrically conductive, stress-absorbing die attach adhesive is designed for bonding large die integrated circuits to substrates with mismatched coefficients of thermal expansion. ABLEBOND 965-1L adhesive exhibits very low levels of contaminants. The rheology of this adhesive is tailored for high speed,automated assembly operations. This product cures to yield a void-free bondline with minimal resin bleed.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Electrically Conductive
Uses 
  • Adhesives
  • Bonding
  • Electrical Parts
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
pH
 
 Internal Method
Weight - Loss on Cure
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-85°F, 0.0197 in
psi
 Internal Method
77°F, 0.0197 in
psi
 Internal Method
302°F, 0.0197 in
psi
 Internal Method
482°F, 0.0197 in
psi
 ISO 527-2
Shear Strength 2
     Internal Method
77°F
psi
  
482°F
psi
  
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 Internal Method
CLTE - Flow
     Internal Method
< 162°F
in/in/°F
  
> 162°F
in/in/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 Internal Method
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Thermoset
Nominal Value
Unit
Test Method
Pot Life (77°F)
min
  
Shelf Life (-40°F)
wk
  
Thermoset Mix Viscosity 3 (77°F)
cP
 Internal Method
Demold Time (347°F)
min
  
Additional Information
Nominal Value
Unit
Test Method
Ionic Chloride
ppm
 Internal Method
Ionic Potassium
ppm
 Internal Method
Ionic Sodium
ppm
 Internal Method
Thixotropic Index 4
 
 Internal Method
Water Extract Conductivity
µS/cm
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ablebond 965-1L, Ablebond 9651L, Ablebond , Ablebond9651L, 965, 965 1 L, 965-1L, 9651L, 965:1L, 965/1L, 965+1L, 965_1L, 965 1L, 9651, 1L, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Henkel Ablestik, EpoxyEpoxide, 1965
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive.
Notes
1Typical properties: these are not to be construed as specifications.
22 x 2mm (80 x 80 mil) Si die,10 0.6 on Ag/Cu leadframe
3Brookfield CP51 @ 5 rpm
4Viscosity @ 0.5/Viscosity @ 5 rpm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.