IDES Prospector Already have an account? Login Here

IDES

VICTREX® HT™ 22GL30

Polyether Ketone

Glass Fiber Reinforcement, 30%

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® HT™ 22GL30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High performance thermoplastic material, 30% glass fibre reinforced PolyEtherKetone (PEK), semi crystalline, granules for injection moulding, standard flow, colour natural/beige.

Higher temperature applications where higher strength in a static system is required. Low coefficient of thermal expansion. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Flow
  • Good Sterilizability
  • Good Wear Resistance
  • High Heat Resistance
  • High Strength
  • Semi Crystalline
Uses 
  • High Temperature Applications
  • Medical/Healthcare Applications
  • Non-specific Food Applications
Appearance 
  • Natural Color
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Molding Shrinkage 3
     ISO 294-4
Across Flow
%
  
Flow
%
  
Water Absorption
     ISO 62
73°F, 24 hr, 0.126 in
%
  
Saturation, 73°F, 0.126 in
%
  
Spiral Flow 3 (39.4 mil)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Break, 73°F
psi
  
Break, 257°F
psi
  
Break, 347°F
psi
  
Break, 437°F
psi
  
Break, 527°F
psi
  
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength
     ISO 178
527°F
psi
  
347°F
psi
  
257°F
psi
  
73°F
psi
  
Compressive Stress
     ISO 604
73°F
psi
  
248°F
psi
  
392°F
psi
  
482°F
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1U
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Ae
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow: < 306°F
in/in/°F
  
Flow: > 306°F
in/in/°F
  
Transverse: < 306°F
in/in/°F
  
Transverse: > 306°F
in/in/°F
  
Specific Heat (73°F)
Btu/lb/°F
 DSC
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
 Internal Method
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (73°F, 1 kHz)
 
 IEC 60250
Dissipation Factor (73°F, 1 MHz)
 
 IEC 60250
Electric Strength (0.0984 in)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
 ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® HT™ 22GL30, VICTREX HT 22GL30, VICTREX® HT™ , VICTREX HT, VICTREXHT22GL30, VICTREXHT, 22 GL 30, 22GL30, 22GL, GL30, Polyether Ketone, PEK, Polyaryletherketone, PAEK, Victrex, PolyetherKetone, GL22
Features
Features may also be described by the following terms: Semi-Crystalline, Good Flow, High Strength, Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, Good Starilizability, Sterilizable, High Heat Resistance.
Uses
Uses may also be described by the following terms: Medical Applications, Food Applications.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
Notes
1Typical properties: these are not to be construed as specifications.
2Crystalline
3395°C nozzle, 200°C tool
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.