IDES Prospector Already have an account? Login Here

IDES

TAROLON 2500 G6 X1

Polycarbonate

Glass Fiber Reinforcement, 30%

Supplied by Taro Plast S.p.A.

The technical datasheet with complete property values for TAROLON 2500 G6 X1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polycarbonate medium viscosity, 30% glass fiber reinforced, self extinguishing, brominated flame retardants free, good mechanical properties also at high temperature, good dimensional stability.

UL 94 approved all colors V1 at 1,6 mm and V0 at 3,5 mm.

Available: all colors.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Brominated
  • Good Dimensional Stability
  • Medium Heat Resistance
  • Medium Viscosity
  • Self Extinguishing
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (300°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
      
73°F, 24 hr
%
 ASTM D570, ISO 62
Saturation
%
 ASTM D570
Saturation, 73°F
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638, ISO 527-2
Tensile Strength (Break)
psi
 ASTM D638, ISO 527-2
Tensile Elongation (Break)
%
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 2 (73°F)
ft·lb/in²
 ASTM D256, ISO 179
Notched Izod Impact (73°F, 0.126 in)
ft·lb/in
 ISO 180, ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Max. Continuous Use Temperature
      
--
°F
 UL 746B
-- 3
°F
 IEC 60216
Vicat Softening Temperature
°F
 ISO 306/A50, ASTM D1525 4
Ball Pressure Test (275°F)
 
 VDE 0470
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.138 in
 
  
Glow Wire Ignition Temperature (0.0787 in)
°F
 IEC 60695-2-13
Oxygen Index
%
 ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TAROLON 2500 G6 X1, TAROLON , TAROLON2500G6X1, 2500 G 6 X 1, 2500 G6 X1, 2500G, G6, 6X, X1, 2500G6X1, Polycarbonate, PC, Taro Plast, G2500
Features
Features may also be described by the following terms: Medium Viscosity, Self Extinguishing, Self-Extinguishing, Good Dimensional Stability, Dimensionally Stable, Medium Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
      
--
°F
  
Pre-heater
°F
  
Drying Time
      
--
hr
  
Pre-heater
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
26x4x50 mm
320000 hrs
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.